How To Change Trane Xr80 Filter

Of all the DIY plumbing and HVAC tips out in that location, knowing how to change your furnace filter is one of the simplest, merely most important. Depending on the quality of your filter, y'all may need to supervene upon it every month. And then here's a stride-by-step tutorial that volition walk you through replacing your filter. (This will be particularly useful for those with Trane furnaces.)

1. Get to know your furnace

Understanding the basic layout of your furnace will brand it easier to change your furnace filter. It volition besides ensure you do it correctly. The filter is located near the air return. The direction of air period moves from the air return to the air supply, which you will want to retrieve when yous insert your new filter.

2. Get a make clean filter

Make sure your replacement filter is the same size as your former i. You should observe the dimensions labeled on the erstwhile filter. We've explored filter types in another post, only it'southward worth repeating that pleated is more efficient than not-pleated. So if your old filter isn't pleated, it's worth the upgrade.

3. Plough off the furnace

Turn off the furnace before you supplant the filter. Otherwise, unfiltered particles might enter the HVAC organisation, and would be putting your ain rubber at unnecessary risk.

You furnace probable has a switch located nearby. If your furnace doesn't accept a switch, but lower your dwelling house's thermostat.

iv. Locate the filter rack

As illustrated in Step one, the filter rack is located next to the air render. There is ordinarily a lid or latch that you will need to open in order to access the former filter.

v. Remove the dirty filter

Removing the old filter is as easy equally pulling it out of the furnace rack. Take note of the old filter's size and orientation equally you remove it!An arrow indicating the direction of air menses is usually located on the filter, which makes this step easy. The air flow should be directed toward the air supply.

6. Insert the clean filter

When you insert the clean filter, make sure the pointer indicating the direction of air flow is in the right direction. Simply push the filter into the filter rack, and shut the chapeau or latch.

7. Plow on the furnace

Turn the furnace back on — either by switch or thermostat, depending on your setup.

And you're done! If y'all accept any questions, don't hesitate to give united states a call. We're happy to assist!